(512f) Elucidating the Mechanism of NOx Adsorption and Reduction on Dual-Functional Ag/MgO/Al2O3 | AIChE

(512f) Elucidating the Mechanism of NOx Adsorption and Reduction on Dual-Functional Ag/MgO/Al2O3

Authors 

Bhatia, D. - Presenter, Indian Institute of Technology Delhi
Shrivastava, A., IIT Delhi
Dual-functional Ag/MgO/Al2O3 catalyst is developed, which functions as a passive NOx adsorber at low temperatures (115 ℃) and a NOx reduction catalyst at higher temperatures. A combination of bench-scale reactor studies and in-situ DRIFTS experiments are used to propose the mechanism for NOx adsorption and reduction. It is found that NO gets adsorbed in the form of nitrites (NO2-) and nitrates (NO3-) at low temperatures (Fig. 1). The species (1234 cm-1) are formed at early times, and the peak intensity of species (1499 and 1324 cm-1) increases at later times. The intensities of some of the nitrate peaks (1499 cm-1) are significantly higher over Ag/MgO/Al2O3 as compared to Ag/Al2O3, MgO, Al2O3, and the bare MgO-Al2O3 support, thus suggesting the significant role of metal-support interactions in enhancing the amount of NOx storage over Ag/MgO/Al2O3. Adsorption experiments are followed by temperature ramp experiments, and the DRIFTS peaks at 1508, 1373, and 1319 cm-1 are present even at 500 ℃ (Fig. 2). The presence of H2 significantly increases the amount of NOx storage and is explained by the conversion of NO2- to NO3- species (Fig. 3). Even though the adsorbed species are the same in the presence and absence of O2, the formation of nitrites is more in the presence of O2. Moreover, the same adsorbed species are formed with NO and NO2, which is consistent with reactor experiments where similar adsorption/desorption features are observed in the presence of these two species. Based on the insights obtained, a kinetic model is developed to predict the spatio-temporal profiles of NO and NO2 over Ag/MgO/Al2O3 (Fig. 4). In the full manuscript, the mechanistic insights in the presence of C3H6 and NH3 reductants will be presented, and the effect of replacing Ag with Cu will be discussed.