(567a) Effect of Sample Concentration On the Determination of the Anisotropy Constant of Magnetic Nanoparticles

Techniques such as equilibrium (DC) and dynamic (AC) magnetic measurements have been used to determine the anisotropy constant of a variety of magnetic nanoparticles, obtaining values that are often an order of magnitude higher than the corresponding bulk material. Unfortunately, the effect of particle-particle interactions is often neglected, hence the reported values are an effective collective parameter, rather than an intrinsic property. In this study DC and AC magnetic measurements are used to determine the anisotropy constant of magnetic nanoparticles fixed in a cross-linked polymer matrix. Nanoparticle concentrations of 0.1%, 1%, 6% and 33% (w/w) were used in order to determine the effect of concentration, and hence interactions, on the value determined for the anisotropy constant. The effect of interaction on determining the magnetocrystalline anisotropy constant was accounted for by using the Néel and Vogel-Fulcher relaxation models, the latter with an effective interaction temperature determined from independent measurements. A decrease in the anisotropy constant determined from these measurements was observed with decreasing particle concentration from ~6100 kerg/cm³ to ~500 kerg/cm³ using the Vogel-Fulcher model and from ~9100 kerg/cm³ to ~1100 kerg/cm³ using the Néel model. The values obtained for the most dilute samples using the Vogel-Fulcher model are of comparable magnitude to bulk values for magnetite. More importantly, the value of the characteristic time τ₀ obtained from AC susceptibility decreased from 10^-32 to 10^-9 s with decreasing particle concentration. As τ₀ is expected to be of the order of 10^-9 s, these results indicate that the value of magnetic anisotropy determined for the dilute sample represents an intrinsic rather than effective property. These measurements and analysis illustrate the importance of particle concentration/interactions in determining the intrinsic magnetic properties of nanoparticles, particularly the anisotropy constant.