(56c) Experimental Studies on the Effect of Moisture Content and Volume Resistivity on Electrostatic Behaviour of Pharmaceutical Powders
World Congress on Particle Technology
2018
8th World Congress on Particle Technology
Applications of Particle Technology for Pharmaceuticals
Advances in Particle Engineering for Pharmaceutical Applications II
Tuesday, April 24, 2018 - 2:20pm to 2:40pm
Pharmaceutical powders are mainly organic materials and are likely to be charged due to repeated inter-particle and particle-wall contacts during industrial processes. This study experimentally investigated the effect of moisture content (ranging from approximately 1.8 to 30 wt. %) on tribocharging behaviour of pharmaceutical granules, as well as their apparent volume resistivity. The tribocharging behaviour of pharmaceutical granules was investigated using a rotating device and apparent volume resistivity was measured in a conventional volume resistivity test cell. Additional measurements were performed on individual ingredients, each having the same moisture content as that of the granules, in order to investigate the effect of each single ingredient on the apparent volume resistivity of granules. In this work, the individual ingredients used for granules were: ð¼-Lactose Monohydrate (ð¼-LMH), Microcrystalline Cellulose (MCC), Hydroxypropyl Methylcellulose (HPMC), and Croscarmellose Sodium (CCS). The results showed that the specific charge of granules began to increase at the moisture contents below 5 wt. %, which can be referred as critical moisture content of granules. The apparent volume resistivity showed the same behaviour, indicating that the specific charge could be due to an increase in apparent volume resistivity of granules at reduced moisture content. Finally, it was shown that the apparent volume resistivity measured for granules was mainly affected by that of the ð¼-LMH, the major component of granules accounting for 40 wt.%.