(436a) Magnesium Oxychloride Formation Kinetics and Enhanced Water Stability for Sustainable Building Materials Applications | AIChE

(436a) Magnesium Oxychloride Formation Kinetics and Enhanced Water Stability for Sustainable Building Materials Applications

Authors 

Kitchens, C. - Presenter, Clemson University
Vashishtha, S., Birla Institute of Technology and Science (BITS) - Pilani
Magnesium oxychloride (MOC) is a ceramic material with significant fire resistant properties and growing potential as a light-weight, structurally strong alternative building material. Despite many advantages, MOC has limitations as a construction material, particularly water stability. While researchers have explored solutions to these shortcomings, fundamental understanding of this material is still urgently needed. Thus we have investigated the fundamentals of the formation cure reaction and mechanisms of water stability enhancement reactions. The formation cure reaction kinetics for magnesium oxychloride 5-phase was monitored from 35 to 55°C using time-resolved quantitative x-ray diffraction and differential scanning calorimetry (DSC). The reaction was characterized as a two-step process: dissolution of magnesium oxide into a gel state followed by crystallization of magnesium oxychloride. Assuming first-order kinetics for both MgO dissolution and MOC crystallization, a kinetic model predicts 42.4 kJ/mol and 26.1 kJ/mol for dissolution and crystallization activation energies respectively. Alternatively, the Avrami nucleation and growth model was fit to DSC measurements predicting diffusion controlled, one-dimensional growth with an activation energy of 72.4 kJ/mol, accounting for both dissolution and crystallization.

For the water stability enhancement, two methods of water stability enhancement have been explored: chlorartinite formation from CO­2 exposure and phosphoric acid addition. The conversion of magnesium oxychloride to chlorartinite by CO2 forms a protective, semi-insoluble chlorartinite layer on the surface of the magnesium oxychloride crystals, which improves water stability. Phosphoric acid (2.5 to 10 wt. %) was added to the MOC slurry before the cure reaction. Additions of 2.5 wt. % and above had positive impacts on the water stability, preserving ~50 wt. % crystalline MOC after the water stability test, but has a significant impact on the MOC formation kinetics. This is achied via. the formation of an amorphous phase on the MOC crystal surface that contains structural motifs related to insoluble MgHPO4·3H2O (newberyte) and Mg2P2O7·3.5H2O (magnesium pyrophosphate) phases. Results from this work are significantly impactful for the use of MOC in more sustainable alternatives for conventional materials in residential and commercial building applications.