Technical Presentations | AIChE

Other Sites & Tools

Technical Groups

You are here

Technical Presentations

Challenges in Developing and Implementing Safety Risk Tolerance Criteria

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
Risk quantification can help in understanding and managing risk. Establishing quantitative risk criteria can be a key component to risk decision-...

Atmospheric Storage Tank Explosion Modeling

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
Many flammable products are usually stored in large vessels at atmospheric pressure. Ignition of an hydrocarbon-air mixture in such tanks can lead to...

Process Safety Management in the Energy Sector

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
This paper describes experience of application of the principles of process safety management within Centrica plc, an integrated energy company with...

Use of Multiply Non-Destructive Examination (NDE) Methods in Life-Cycle Evaluation of Process Equipment and Systems

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
Equipment reliability is essential to the safe operation of process equipment. The health of process equipment must be analyzed by competent...

Optimizing Facility Siting and Layout through Mapping Risk Estimates on Plant Area and Monetizing

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
This research is focused on suggesting the methodology to find optimal placement for hazardous facilities and other process plant buildings using...

Consequence Modeling of Chlorine Release

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
This paper describes the Consequence Modeling of Chlorine release from a Chlor Alkali plant as a part of Process Hazard Analysis. The objective was...

Ensuring Consistency of Corporate Risk Criteria

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
The recently published CCPS text Guidelines for Developing Quantitative Safety Risk Criteria makes a strong case for corporations developing risk...

Stability Analysis of Safety Valve

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
The stability for a safety valve was investigated by experiments and analysis. It was found that the dynamic instability was caused by the...

Risk-Based Mechanical Integrity - Beyond Fixed Equipment

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
This paper presents approaches to provide a safer operating plant by extending mechanical integrity to all process equipment using a risk-based...

Modeling Small Releases from Tanks

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
The methodologies in the chapter on “Dispersion Modeling” in the CCPS book Guidelines for Consequence Analysis of Chemical Releases, provide means...

Pages

You may also be looking for...