Johannes Khinast

Georg Schitter

(382a) Direct Numerical Simulation of Reactive Deformable Bubble Swarms in Non-Newtonian Fluids

2006 Annual Meeting

(322d) Preparation of Tuneable Biofunctionalized Surfaces for Sensing and Biomedical Applications

2006 Annual Meeting

(515ax) Deformation And Stress Of Cells In Turbulent Vortices

2006 Annual Meeting

(38c) Dns-Derived Models For The Prediction Of Yield And Selectivity In Reactive Bubbly Flows

Kathrin Wagner

2007 Annual Meeting

(609f) Impact Of Impregnation And Drying On The Metal Distribution In Supported Catalysts

2007 Annual Meeting

(569b) Numerical Analysis of Multicomponent Flow and Condensation In a Dhp Chamber

2007 Annual Meeting

Radompon Sungkorn

(170f) Simulation of Non-Newtonian Flows In Bioreactors Using Lattice Boltzmann Method

Pietro Santagati

2008 Annual Meeting

Pietro Santagati

(487i) Drying of Supported Catalysts – Impact of Film-Breakage and Crystallization On Metal Distribution

2008 Annual Meeting

(116h) Numerical Simulation of Gas-Liquid Flow in a Flat Bubble Column Using the Lattice-Boltzmann Scheme

2009 Annual Meeting

Radompon Sungkorn

(615h) Improving Drum Coating Processes by Computational Modeling and Experimental Evaluation

2009 Annual Meeting

2009 Annual Meeting

(250f) Continuous Preparation of APIs in a Tubular Crystallizer

Rafael J. P. Eder

Sabine Innerhofer

Markus Maier

(429e) Development of a Stationary Phase for Continuous Annular Electro-Chromatography (CAEC)

2009 Annual Meeting

Marie-G. Braunbruck

Peter Feenstra

(166b) Implementing Risk- and Knowledge Management Tools Into Product- and Process Development According to Quality by Design

2009 Annual Meeting

2009 Annual Meeting

(251d) Transversal Hot Zone Formation in Adiabatic Packed Bed Reactors

Ganesh Viswanathan

Aditya Bindal

(531b) Investigation of Shear Stress- and Hypoxia-Induced Mammalian Cell Damage in Aerated Bioreactors

2005 Annual Meeting

Athanas A. Koynov

(466c) Continuous-Phase Mixing in Reactive Bubble Swarms with Fully Resolved Dynamic Interfaces

2005 Annual Meeting

Athanas A. Koynov

(399e) Granular Flow of Wet Solids in a Four Bladed Mixer

2005 Annual Meeting

Azzeddine Lekhal

(16b) Asymmetric Hydrosilylation of Imines Using a Chiral Ansa-Titanocene Catalyst: Mechanistic Studies and Reaction Kinetics

2005 Annual Meeting

Anthony Panarello

(289q) Computational Modeling of Group 4 Metallocenes: Geometry Prediction and Reactivities

2005 Annual Meeting

(289x) Preparation of Supported Catalysts: Effect of pH

2005 Annual Meeting

Azzeddine Lekhal

(470a) Preparation of Monolithic Materials for Continuous Annular Electro-Chromatographic Separations of Active Pharmaceutical Ingredients

2005 Annual Meeting

(544a) Polydisperse Granular Flows in a Bladed Mixer: Experiments and Simulations of Cohesionless Spheres

2010 Annual Meeting

Brenda Remy

(303d) Experiments and Simulations of Cohesionless Particles with Varying Roughness in a Bladed Mixer

2010 Annual Meeting

Brenda Remy

(297f) Euler-Lagrange Modeling of Turbulent Bubbly Flows with Coalescence and Breakup

2010 Annual Meeting

Radompon Sungkorn

Jos Derksen

(509e) Continuous Manufacturing of Active Pharmaceutical Ingredients Using Organometallic Heterogeneous Catalysis

2010 Annual Meeting

Paul Radaschitz

Peter Feenstra

Eleonora Polo

Georg J. Lichtenegger

(492f) Mechanisms of Drying of Supported Catalysts for Low and High Metal Loadings

2010 Annual Meeting

(570y) Belt Drying and Microwave Drying of Supported Catalysts

2010 Annual Meeting

(510d) Real-Time Monitoring of Pharmaceutical Manufacturing Processes with a Multiplexed Optical Fiber Probe NIR-Setup

2010 Annual Meeting

Nikolaus Balak

Daniel M. Koller

(158d) Modeling of Nucleation and Transport of Particles in Pharmaceutical Multiphase Reactors

2010 Annual Meeting

Christina Petschacher

Andreas Zimmer

(621b) An Integrated Quality-by-Design (QbD) Approach towards Design Space Definition of Key Unit Operations In the Manufacturing of Solid Dosage Forms by Discrete Element Method (DEM) and Computational Fluid Dynamics (CFD) Simulation

2010 Annual Meeting

2010 Annual Meeting

(303e) Single Blade Experiments On Granular Flow and Mixing

2010 Annual Meeting

(509g) Preparation of API-Crystals in a Continuously Seeded Tubular Crystallizer

(90g) Wet-Mixing Simulations of Powders in a Blade Mixer

2010 Annual Meeting

Charles Radeke

(320a) Raman Chemical Mapping Vs. NIR Spectroscopy for Assessing the API Distribution and Coating Thickness of Tablets

Stefan Radl

2010 Annual Meeting

2010 Annual Meeting

(108f) Investigation of a Tablet Coating Process Using a Multi-Model Simulation Approach

2010 Annual Meeting

(544b) Effects of Blade Shape and Angle On Solid Particle Mixing Using 2D and 3D Discrete Element Simulations

Muhammad Shafiq Siraj